Producten Luchtbehandelingskasten HPCDH

Media

HPCDH
HPCDH


Beschrijving

Reznor's HPCDH units are high air flow, indirect-fired, makeup air systems designed for either indoor or outdoor installation. Units can be configured for: floor mount, outdoor pad mount, rooftop or suspended installations. A wide range of discharge configurations are possible including: top, bottom or horizontal discharge supply air. Model HPCDH systems are available to operate on either natural gas, propane or fuel oil.

Larger sizes are available on special order basis (contact your Reznor Representative for more more information).

Model HPCDH meet ETL (ANSI) standards for installation in the United States and CGA (CSA) standards for installation in Canada.

Verwarmingscapaciteit ( MBH )

Koelcapaciteit ( MBH )

Luchtdebiet ( CFM )

Rendement bij vollast ( BW )

Standard Features:

  • All units are factory wired, piped and test fired.
  • Single wall cabinet (with interior 22 gauge liner on burner section)
  • Gray enamel finish on 18 gauge Galvaneal cabinet construction
  • 1" thick 1.5 lb. neoprene coated fiberglass insulation
  • Std with Natural gas operation
  • 409 stainless steel primary and secondary heat exchangers
  • Gravity vent exhaust Standard
  • Range of supply voltage options
  • Burner manifold meets ETL (ANSI) or CGA (CSA) standards
  • 6:1 turndown ratio modulating power burner
Factory Installed Options:
  • 22 gauge solid or perforated interior cabinet metal liner on blower, filter, mixing box, or inlet plenum sections.
  • Special material cabinet coating
  • 1" thick high density (2 lb.) or 2" thick cabinet insulation
  • UL Listed or CGA Certified
  • Propane or fuel oil operation
  • Power vent exhaust
  • 304 stainless steel primary and secondary heat exchangers (or 304 primary with a 409 secondary stainless steel heat exchanger)
  • 208/3/60, 230/3/60, 460/3/60, or 575/3/60 supply voltages
  • Vibration isolation
    • 1" deflection motor/blower
    • spring vibration isolation
    • 2" deflection motor/blower
    • spring vibration isolation
    • Motor/blower rubber-inshear
    • isolation
    • 1" external spring isolation
    • under unit channel base
    • 2" external spring isolation
    • under unit channel base
    • Seismic isolation, pad type
    • External spring hangers -1" deflection
    • External spring hangers - 2" deflection
    • Siesmic isolation, hanger type
  • Left or right hand controls
  • Extended lube lines
  • Top, bottom or horizontal supply discharge air
  • Two position motorized discharge air shutoff damper, spring return (also available with low leak airfoil type dampers)
  • Outdoor units
  • Weatherhousing covers the control section on outdoor units
  • Roof slopes away from weatherhousing on Model HPCDH 125 and larger
  • Manifold meets IRI and/or FM requirements
  • 15:1 turndown ratio modulating burner
  • UV flame supervision
  • Unit mounted discharge temperature sensor
  • Premium efficiency ODP motors or TEFC motors
  • Variable frequency drive
  • Convenience outlet

Field Installed Options:

  • Service Platform
  • Discharge air attachements
    • Trapezoidal, 3 facet cowl with horizontal louvers (also available with double deflection louvers)
    • 4-sided (360 deg.) louvered discharge plenum
    • 90 deg. or 45 deg. louvered nozzles
  • Filter section (with 2" permanent or pleated filters)
    • Flat filter rack
    • V-bank filter rack
  • Mixing box with 3-position motorized dampers.
  • Louvered inlet plenum (for outdoor units)
  • DX or chilled water coil for downstream installation
  • Evaporative cooling module
    • Available with stainless steel cabinet
    • 12" thick Glasdek or Celdek media
    • 1" or 2" aluminum mesh, washable filters
    • Louvered inlet or screened inlet hood
    • Fill and drain options
  • Steam or hot water coil cabinet
  • Gas pressure safety switch
  • Adjustable freezestat
  • Post and/or pre-purge timer
  • 16" or 26" roof curb
  • Remote Console
  • Raintight safety disconnect switch

 


Brochures
4 Bestanden

Brochures


English
Large Capacity Heater Marketing Catalog
Large Capacity Heater Marketing Catalog
Bestand downloaden
940.5 kB
Cooling & Ventilation Product Line
Cooling & Ventilation Product Line Card
Bestand downloaden
466.7 kB
Heating & Ventilation Product Line
Heating & Ventilation Product Line Card
Bestand downloaden
553.6 kB
VRF Product Line
VRF Product Line Card
Bestand downloaden
369.1 kB

Technische Gegevens
1 Bestand

Technische Gegevens


English
Tech Spec - Large Air Handlers
Description, options, dimensions for Series PCD
Bestand downloaden
2.1 MB

Onderhoud / Installatie
2 Bestanden

Onderhoud / Installatie


English
Unit Installation Manual - HPCDV & HPCDH
Installation Manual for HPCDV / HPCDH Models
Bestand downloaden
116.9 kB
Field Service - Replacement of Discontinued Relays
Installation for kits designed to replace relays no longer available from suppliers. Applies to all Reznor units using obsolete relays.
Bestand downloaden
340.4 kB

Andere Bestanden
1 Bestand

Andere Bestanden


English
Warranty Statement
Reznor equipment limited warranty statement
Bestand downloaden
183.4 kB