HRPD Rooftop Dual Duct Furnace

HRPD Rooftop Dual Duct Furnace

Reznor’s HRPD rooftop dual duct furnaces are designed to be used in series: as the heating component in either a heating, heating/cooling or makeup air system.

  • Eight unit sizes ranging from 250,000 to 800,000 (consists of two model RP furnaces)

  • Voltage/phase/Hz options: 115/1/60, 208/1/60, 230/1/60, and 460/1/60

  • Natural gas or propane

  • Aluminized-steel burner with stainless steel insert

Factory-Installed Options

  • 115/1/60, 208/1/60, 230/1/60, or 460/1/60
  • Intermittent spark pilot with timed lockout (required on propane units)
  • Electronically-modulated firing
  • Makeup air gas controls
  • Burner air shutters (required on propane units)
  • Left- or right-side controls
  • Various relay options
  • Gas pressure safety switches
  • Air flow proving pressure switch

See all options

Field-Installed Options

  • Thermostat options
  • Temperature selector and override options
  • Manual gas shutoff valve
  • Various remote switch options
  • Outdoor raintight disconnect switches
  • Photoelectric air duct sensor

See all options

Certification

This unit is design-certified to ANSI and CSA standards by the Canadian Standards Association and is approved for installation in the United States and in Canada. The furnaces are approved for use with either natural gas or propane. The type of gas for which the furnace is equipped, the correct firing rate, and electrical requirements are shown on the unit’s rating plate.

Warranty

Manufacturer Product Limited Warranty

Reznor LLC warrants to the original owner-user that this product will be free from defects in material and workmanship.
This warranty is limited to twelve (12) months from the date of original installation, whether or not actual use begins
on that date, or eighteen (18) months from date of shipment, whichever occurs first.

HRPD Rooftop Dual Duct Furnace

Reznor’s HRPD rooftop dual duct furnaces are designed to be used in series: as the heating component in either a heating, heating/cooling or makeup air system. Each of the dual furnaces is certified for 80% thermal efficiency for use with either natural or propane gas, as specified.

Advanced Features

Designed for demanding commercial and industrial heating applications, the Reznor® HRPD Outdoor Duct Furnace has several advance features including:

Heavy-Duty Heat Exchanger

Each HRPD furnace is equipped with a Thermocore® aluminized steel heat exchanger engineered for long service life and dependable performance.

Service-Friendly Configuration

Accessible control sections and configurable left- or right-hand control locations help simplify installation, maintenance, and service procedures.

Heavy-Duty Heat Exchanger
Service-Friendly Configuration

Why Choose HRPD Rooftop Dual Duct Furnace

Efficient Operation

Efficient Operation

Featuring up to 80% thermal efficiency, the HRPD helps deliver consistent heat while supporting energy-efficiency

Outdoor Approval

Outdoor Approval

The HRPD is specifically designed for rooftop and outdoor applications, making it an ideal choice when indoor mechanical space is limited.

Advanced Control Options

Advanced Control Options

A variety of control packages are available, including single-stage, two-stage, and electronic modulation options to enhance temperature control

Let's get your project started!

Whether you’re upgrading your space or replacing a system, a REZNOR® partner can guide you in the right direction.